Using aluminum foil, there are several methods to strengthen the WiFi signal . Discover the simplest one, the one you can do right now at home!
You will need the following items:
- aluminum foil (or an aluminum can)
- A small box (or the box the router came with)
- Scotch tape
First, stick the aluminum foil to the surface of your box. Its size should approximately match the size of the router. If you still have the box that the router came with, then you should replace your little box. Make sure the aluminum foil extends over all surfaces. Use tape or glue to keep it flat.
Then place the box right behind the antennas. That’s it, that’s it! You can then do internet speed tests to see the difference.
Better WiFi signal. source: spm
If you prefer to use an aluminum can, you should follow this process: first wash the can. Then cut off the top and bottom with strong scissors or a knife. Be careful not to hurt your hands! After this work, you will end up with a hollow cylindrical box. Now cut the coil vertically to get a flat sheet. Finally, place this sheet behind the router or antennas to strengthen your WiFi signal. You can use tape to secure it.
We still recommend that you opt for aluminum foil instead of the can, as it is the simplest and least risky maneuver.
There you go, now you can apply this trick to benefit from an even stronger WiFi signal!
